How to Use Seal and Bison Skull Stickers on Gear

Quick answer

Clean the surface, peel the backing, press from the center outward, and let the adhesive cure for 24 hours before exposing the gear to moisture or heavy use.

Step-by-step sticker application

1. Clean the surface thoroughly: Wipe the area with isopropyl alcohol or a mild soap-and-water solution to remove dust, oil, and residue. Let it dry completely. A greasy surface is the most common cause of peeling edges later.
2. Position the sticker before peeling: Hold the sticker in place without removing the backing to confirm alignment. Use a piece of painter's tape to hinge one edge if you want a guide. Once the adhesive touches the surface, repositioning can weaken the bond.
3. Peel and apply from the center outward: Peel a small section of the backing, press the exposed adhesive onto the surface, then slowly peel the rest while pressing with a squeegee or credit card wrapped in a soft cloth. Bubbles form when you press from the edges inward instead of the center outward.
4. Let the sticker cure for 24 hours: Avoid washing the gear, exposing it to rain, or flexing the sticker area for a full day after application. The adhesive reaches full strength after curing; early moisture is the top cause of edge lift.

Stickers mentioned in this guide

• BISON SKULL STICKER: 4" x 2.75" vinyl sticker made in the USA. The larger size gives you more design visibility on a tent flap or cooler lid.

  

• SEAL STICKER: 2.5" x 2" vinyl sticker made in the USA. The compact size fits neatly on water bottles, laptop lids, or small gear panels without overlapping edges.